Feature and Benefits :
•Formulated to meet BfR,XV and FDA21 CFR 177.2600
•Unprimed adhesion to glass fabric
D412 DIE C
D412 DIE C
D624 DIE B
Elongation at break
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT
AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION.
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Health And Environmental Information:
To support customers in their product safety needs, Dow has an extensive Product Stewardship organization and a team of product
safety and regulatory compliance specialists available in each area.
For further information, please see our website, www.consumer.dow.com or consult your local Dow representative.
This product is supplied in 20 Ltr. & 200 ltr.
Usable Life And Storage:
When stored at or below 32°C (90°F) in the original unopened containers, this product has a usable life of 15 months from the date of production.
How To Use:
Mixing and De-Airing
Mixing and De-Airing (Cont.)
The A ,B & C components are supplied strained and de-aired to be used as lot matched kits.
Mix parts A,B & C in a 11 :0.1 ratio. Meter mix equipment which pumps, meters and mixes the two components without
the incorporation of air is strongly recommended for production. If air bubbles are entrapped during mixing the
mixture must be thoroughly de-gassed under vacuum.
When parts A,B & C are mixed the mixture will remain usable for 12 hours at 25°C (77°F).
The uncured silicone can readily be removed by most hydrocarbon solvents. Polar solvents, such as ketones
and alcohols, are not suitable.
Thermocoat HT Liquid Silicone cures rapidly at elevated temperatures. The cure time depends on the thickness and the
cure temperature used. Cure can be inhibited by contact with certain materials such as amines, sulphur and
tin complexes. un complexes.Pigmentation This is normally carried out during mixing and dispensing of the three
components. Thermocoat HT Liquid Color Masterbatches are recommended with normal addition levels of 2 to 4%
based on total volume.
This is normally carried out during mixing and dispensing of the three components. Thermocoat HT Liquid Color
Masterbatches are recommended with normal addition levels of 2 to 4% based on total volume.